The biggest mistake ever

pocket

This doesn’t look too bad. It’s my take on the pocket of the StyleArc Talia pants. The instructions are minimal, there are instructions on their website but I was not sure it would look good. So I decided to make a “window pane” construction. After I had done all the work I was wondering why the pocket bags didn’t meet the center front, they did in the paper pattern…..

Turned out I’ve sewn the pocket in the back pattern pieces. The BACK!!
In the many years that I sew I’ve made every mistake you can think of. But this one made me think I’ve gone mad. Bet you never did this!

How did this happen? A week ago I cut this pair of pants to quickly sew it up without the pocket to have my daughter try it on. So I did not cut the front with the ‘indent’ for the pocket but just cut a straight line. Both for ease of sewing and for the fact that I was not sure about the construction in the instructions. After my daughter had tried it on and I marked the few adjustment necessary,  I just opened part of the seams to construct the pocket, thinking I would serge the seams later on. I must have been too tired and didn’t notice I was working in the back pattern pieces.

After the initial disappointment (and being very angy with myself, also doubting my ability to sew) I’ve cut the pocket part off and changed the back to have a shaped yoke. The pocket will be a traditional inseam pocket probably. I promised my daughter to make her these pants, if it would have been for myself I’d probably tossed it in the bin yesterday evening.

Tell me about your worst mistake, let me know I’m not alone in doing something stupid!

Comments

Post a Comment

Popular posts from this blog

About t-shirts and hemming with coverstitch

Image
Pictures of the finished skirt have to wait. I want to hem my skirt with “steam a seam” tape but forgot to buy it and as most of my fabrics and notions are in storage, I had none available at all. So I spent my weekend sewing two t-shirts. The pattern is the Ann T-top from StyleArc: I’ve made this pattern several times now and it’s a great basic. After the initial one last year (never blogged about as far as I remember) I removed the gathers in the front by folding up at waist level. Until recently I used an old Ottobre pattern from 2007 as my base for t-shirts, which is still a great pattern. But, as you can guess, it’s in storage (by accident though). The neckline and hems of both t-shirts were finished with a coverstitch. I’ve had a love/hate relationship with my Janome coverstitch for quite a long time, but have become used to it and now it’s taken out and used regularly. For a long time I did not use it properly either and on the inside you could see the edge of the hem st...
Read more

Book review - Patternmaking for jacket and coat design

Image
A few of you expressed an interest in a proper review for the book Patternmaking for jacket and coat design by Pamela Vanderlinde. I found this book online when I was browsing through online bookstores looking for another book. As I’ve done quite a bit of pattern drafting in the past 2-3 years and have bought quite a few reference books on drafting as well, this caught my eye. Seeing some pages of it online I got really interested. It seemed to work from the same kind of block/sloper that I made for myself in Suzy Furrer’s Craftsy class so would help me get further from that starting point. I was not disappointed: it does work from a block or sloper, but the draft of a basic block or sloper is not included in the book . The author assumes you have a sloper to start with (explicitly mentioned in the book) and also assumes you know the basic terminology. I don’t have any problems understanding what is meant. Drafts for 1 piece or 2 piece sleeves are included and drafted different from ...
Read more

Burda dress 119, changes to pattern and construction

Image
There were a few changes I made to the pattern prior to and during construction. For those of you interested in the details, this is what I did. As indicated in the first post on this dress last week, I lengthened the upper body by 1.5 inch. This isn’t hard to do: fold the pleat on the right pattern piece, match it with the placement line on the left pattern piece and you have a full front in which it’s easy to draw a line to lengthen (or shorten) it. I did this just below the armhole. After that the seamlines, diagonal fold and placement lineslines are trued again. Of course this change of length is to be done on the back pattern piece too. This is not an error in the pattern piece. I know my upper body is longer than average and it’s a change I always do in Burda patterns. The other change was cutting off the extra triangle pieces that are on the right side pattern pieces for the top, skirt and waist part. Initially I cut them and understood what the intention was, an extra pleat abo...
Read more