Posts

Showing posts with the label sleeve

Drafting a dress–5, sleeve comparison

Image
As mentioned in my post of yesterday I’m doing a separate post on the sleeve draft. It’s a bit of a nerdy post probably. I write it for those of you who are interested in pattern drafting but also for myself, to remind myself of the differences now I’ve taken the time to do three drafts based on different systems for the same garment. The result of the different drafts (focus on the sleevecap). First the Suzy Furrer draft. Ease is added before drafting giving as guideline 1/2 inch for dresses and blouses, 1 1/4 inch for jackets and coats. The total circumference of the armhole on the front and back + ease is a measurement on which the “square size” is based. The measurements for the square size are given in the book (or in the course materials from the Craftsy course). It’s the dotted line in the drawing. Based on this square the rest of the sleeve is drafted. Second the Helen Joseph-Armstrong draft. The guideline for ease is different and given as 1 1/2 inch for sizes 10 and above,...

Sleeves

Image
I had high hopes of finishing my jacket before Thursday, so that I could wear it to my sons' presentation on his bachelor thesis. It did not work out that way. But my son did fine and I’m a proud mum. It’s on such days that you realize time flies by so very, very fast. It was not a good day to wear a jacket anyway. Warm and very high humidity after days of exceptional rain. Where am I then with the jacket? The sleeves are inserted and it’s down to sewing the lining.  The picture below shows the interfacing of the sleeves. At the upper part the pattern pieces are interfaced with a light weight fusible, the hem with a heavy weight fusible. I already did this when interfacing the body part, to do all the interfacing in one go. If you look closely you can see that I traced the essential points again (top of sleeve, end of seam) with carbon tracing paper. After stitching I made long straight stitches to gather the top of the sleeve a bit. The sleevecap I made as I did before, using a me...

More progress – sleeve

Image
In this jacket I chose to use the “sleeve wrap” method instead of the more conventional sleeve head. I first saw this method used in one of Ann Rowley’s jackets and kind as she is, she has a photo tutorial in her Flicker album . I’ve used it once before when doing a course in making a classic tailored jacket. This is how it looks like on the inside. And here on the outside.   Lyndle asked how and when I add seam allowance, on the fabric or the pattern and whether I use the actual seam lines. I absolutely prefer to work with the seam lines and not often add the default seam allowances. I use wax tracing paper to trace the actual seamlines to my fabric and use those during construction. That paper is a normal sewing notion in the shops here. That said this jacket is a break from that routine: the fabric would not take marking with wax tracing paper and a lot of fusibles were applied too. I cut with the 1.5 cm (5/8”) seam allowance added to the paper pattern, but still mark the...