Posts

Showing posts with the label jacket

Jacket and a pair of pants

Image
Accounting for two other garments from Burda magazine: a pair of pants and a jacket. The jacket is from the June 2018 issue, number 104. Read more »

Jacket Vogue 1439

Image
Over a month ago I showed this jacket in a nearly finished state. Took me two weeks to finish it for real and took another two weeks to get pictures.  The fabric doesn’t behave very well in pictures but I’m happy with the spring vibe it has. Having worn one of my self drafted jackets today and seeing these pictures now I can see that this jacket is too wide in the shoulder area and could have been a little better fitting in general. Sometimes I just don’t want to do all the drafting, but for jackets I really should take the trouble of drafting or make a muslin. This time it was the collar part that I was unsure of and wanted to start and use a pattern. I’ll wear this, it’s just a little moaning amongst sewing friends that it could have been better. The upper part of the back is too wide as well, the lower part is fitting well. For those who have the pattern and might want to sew it: the pattern pieces and instructions for this were a little strange in my opinion. There’s a separate...

The difference a shoulderpad makes

Image
I’m working on a spring jacket. This time I’m not using many tailoring techniques I wanted to make a “quick” jacket, to be combined with a few other items, still to be sewn. The pattern is Vogue 1439. Out of print but still sold at Vogue patterns. This picture from the Vogue website shows the jacket worn with a cowl neck top, not a good choice for this style jacket. Not a very flattering photo. My fabric is totally different and not showing the design lines as well. I will go into more details on the pattern and what I changed in another post but wanted to show you the difference a shoulderpad makes. In the first picture the sleeve on the right hand side (picture left) has a shoulderpad pinned to it, the other not. A few minutes later, the other shoulderpad is pinned too. Can you see that it lifts a bit and als stabilizes the front? I interfaced the front pattern pieces, but did not make a shoulder shield as I mostly do in jackets. But I did add sleeveheads and shoulderpads as I think ...

The finished jacket

Image
Exactly two weeks after I bought the fabric for the jacket, it’s finished. Probably a record for me. It was sort of typical story buying the fabric too. I went to a plant/gardening market with a friend, we both had seen a stall where we wanted to buy something for our respective gardens. In the same village, even the same street, where the market was, is also a fabric store. What does a sewing girl do? Of course, visit the fabric store (the friend is a non sewing friend, she remained outside . The shop is one of those very rare shops that don’t accept payment by card, only cash. I confess paying mostly by card, so my cash was limited and I had just enough to buy this fabric. The cash points at the bank were empty too, probably because of the market, so much more people than normally in that village. I ended the day with fabric and not the garden ornament I was planning to buy, as the stall owner also only accepted cash. Well, what’s more important? A picture that a friend sent last wee...

Sleeves

Image
I had high hopes of finishing my jacket before Thursday, so that I could wear it to my sons' presentation on his bachelor thesis. It did not work out that way. But my son did fine and I’m a proud mum. It’s on such days that you realize time flies by so very, very fast. It was not a good day to wear a jacket anyway. Warm and very high humidity after days of exceptional rain. Where am I then with the jacket? The sleeves are inserted and it’s down to sewing the lining.  The picture below shows the interfacing of the sleeves. At the upper part the pattern pieces are interfaced with a light weight fusible, the hem with a heavy weight fusible. I already did this when interfacing the body part, to do all the interfacing in one go. If you look closely you can see that I traced the essential points again (top of sleeve, end of seam) with carbon tracing paper. After stitching I made long straight stitches to gather the top of the sleeve a bit. The sleevecap I made as I did before, using a me...

Center front zipper installed

Image
I can’t show you pictures of the zipper insertion at center front. It was difficult to make clear photos because the zipper is in between two layers of fabric and I stopped making them. Only the result to show: As you will have seen the center front of the jacket was interfaced with an extra strip of interfacing. When installing a zipper this is extra important, when your fabric stretches you will get ripples or a “wavy” zipper. For this jacket the front and back facing was sewn together. The zipper was basted to the front exactly between the marks for it. I had adjusted the pattern to the closest default zipper length available so that I didn’t have to shorten or order a special length. Then the facing and jacket were pinned, right sides together. For the zipper part I used the zipper foot as you’ve seen in the installing of the pockets. For the remaining parts of the seams I used my normal foot. The facing of the side panel hem still has to be attached and for that reason I left ...

Zipper and pocket insertion

Image
The next step is inserting the zipper and the pocket. There are other ways of doing this, but this is what works for me. I did not make pattern pieces for the pocket, I seldom do for jacket pockets and go with pieces of fabric that are large enough and cut them in shape during the process. First step was basting the zipper into the window and stitch at the edges to sew the zipper in. The zipper after stitching and removing the basting threads. How it looks on the inside. For the part of the pocket that is attached to the lower zipper tape (never visible) I chose a cotton fabric that I sewed onto the zipper tape. Pressed downward The fabric that is attached to the top zipper tape is the fashion fabric, it will be visible when opening the zipper. Now I pinned the pocket lines to the two rectangles of fabric Stitched, cut in shape and the edges zigzagged A peek into the pocket. The fabric of the inner pocket is nog on the same grain as the jacket itself. To me th...

Pocket window

Image
The other night I looked at the front panels that were pinned to the dressform and thought something is not quite right with the pocket placement. I had traced a line on a diagonal but when I saw the basting lines I decided I wanted them to be higher center front and lower at the side. Luckily it was not too late to change it. I removed the extra layer of interfacing for the pocket carefully and added a new piece. I’m using a technique that makes a ‘window’ for the zipper. The perfect fabric to use for the window is silk organza, as it’s thin but sturdy and super bonus is that you can see through it. I couldn’t live without a silk organza press cloth any more for that reason. A rectangle sufficiently wide and long is cut and placed on the right side of the fabric. As I want this to look very good (it’s an eyecatcher of this jacket) I baste a lot at this stage. The outer basting stitches are not the stitch lines, just basting lines to keep the organza in place while stitching. I sti...

Interfacing the body–part 2

Image
First and foremost, thank you so much for all the comments indicating that a lot of my readers like to see the details of construction. The teacher in me likes to share and document the process, but if it’s not of interest to anyone I’d better use my time sewing . I have my times in and out of blogging, which I now regard as something natural. In the early years of blogging I used to feel I “had” to post. That feeling has gone, it’s one of the things I do and like doing very much, but there are times it’s just not a priority and I’m fine with that too. Onwards to the jacket. I’ve added extra interfacing at the point where the pockets are to be set in and  added a strip to the neckline and center front. (the seam needs an extra pressing) I know this pattern fits and I’ve added 1cm (3/8 inch) seam allowances. After applying the interfacing I marked a few crucial spots with carbon tracing paper: start/finish of front zipper insertion, waistline and of course the pocket line. The la...