Posts

Showing posts with the label bra

This was an easy sew

Image
Reading the comments to my previous post was making me feel better: I’m not the only one making such a mistake. Thank you for taking the time to tell your mistake. Some of you said that reading my post made them feel better too and I can fully understand. In the online world we usually tend to show the successes and less the failures that are an inevitable part of sewing too. It’s something I do as well and I was in doubt about posting about the mistake and glad I did in the end. I was able to save the pants and will finish them this weekend, when my daughter is home again she can try it on to determine the length of elastic in the waist. In the meantime I needed something to cleanse the palate, so I made a bra from one of the sets of material I bought when I met up with Jane . I’ve used this lace before (in 2013, can’t believe it’s that long ago), but with black lycra. Now a full embroidered lace was available too and lace trim for the shoulderstraps. Makes it quite different. It’s a...

Lace bra

Image
It’s been a while since I made a bra and it is more than time to make a few new sets. This is my first bra of what I hope will be at least 3 new sets in the next few weeks. It still lacks a bow as I’ve forgotten to take one with me (being abroad for the moment on a lovely holiday). But I’m ever so happy that the fit is very good, as I’ve been struggling with that recently. It’s made of lace which I underlined with a tule to give it the strength I need. Only the plain part of the band you see is stretching. It’s a kind of powernet. The pattern is a copy from a rtw bra with adaptions, as I was not happy with the fit of that one any more either. The inside. I hope you can see that there are two layers of fabric in the cups too. The tule that I used for the bridge and side of the cup is more sturdy and more white than the other fabrics. It doesn’t worry me as it does not show from the right side. I tried something new with construction and used Vliesofix (similar or the same as bondaweb?) ...

A week of finishing ufo’s

Image
In the last few days I’ve been finishing 3 projects. All started in 2016 and still lingering around for one reason or another. The first one to show here is a lace bra. My lingerie drawer has been in need for new items for quite a while now and I’ve been trying to get my bra pattern right again. I had a problem with fitting and just couldn’t get it right (obviously my body changed a bit). When I read the blog post How to add volume to your bra cup by Norma Loehr from Orange Lingerie it dawned on me that this could be the answer to the problem. And its was. I had been making my upper cup longer but what I needed more was some extra room in the cup itself. I’m ever so pleased that the lace in this bra is quite symmetrical, except for the center front (bridge). I did not want to insert a seam there with this lace. The only reason this bra was unfinished for several weeks was the fact that I missed the right colour shoulder strap. Basically it’s a staple colour, but I am short on a few su...

Finished bra

Image
A nice finish is in the details. Can you see the dart in the band? Probably because you know it’s there. The pattern is the Isabelle from Sewy again, using a non-elastic lace ( last time I used a lace with some stretch). Because of the non-eIastic lace I added a little to the upper cup pattern piece and even made a left and right pattern piece because of a small size difference. This is not really an issue when I use lace with some stretch, but in non stretch lace it’s obvious, resulting in a little ‘overflowing”. You get my drift I presume. It’s a problem I have with a couple of previously made bras too, so obviously something has changed and I have to adapt my patterns. This bra is wearable, but I want to make it again with a few changes as I’m not completely satisfied. The added space is not quite enough and I think it would be good if the center front is a bit higher. I bought a couple of different wire sizes to experiment with. Difficult to show as for obvious reasons I don’t wan...

Scallop edge–applying elastic

Image
In my previous post I showed you how I used a tiny dart to get the scallop edge of lace to match the underband of the bra. Or at least, the main center part of it. This means that elastic can’t be used as you would normally do, as now you can’t turn the elastic under the edge of the lace. A picture of how it looks when finished: First the elastic is attached to one side panel, the length of the center part is left open and the elastic attached to the other side panel. When turned the elastic is only topstitched at the center front. The steps in pictures: The side panel is attached to the front, making sure there’s space for the elastic to attach. The inside, the lace panel is underlined with non-stretch tule. The side panel is a double layer. The tule used has some stretch. I use this because my lycra has a lot of stretch and does not give enough support when used as a single layer. The picot elastic is attached with a zigzag stitch, meeting the edge with the lace exactly. ...

A very tiny dart

Image
  One of the projects I’m working on is a new lingerie set. I wanted the scallop edge of the lace on the bottom edge. However, the bottom edge of the pattern is curved. I have posted how I do this before, but it’s many years ago (blogging for over nine years now!). So not too bad to post about it again. This is the pattern piece, including seam allowances (a bit irregular as I traced this on sturdier paper for the pictures). If you want to use the scallop edge at the bottom, the seam allowance must be removed. Position the center front where you want it. I always use a deep point of the scallop. Also keep in mind how the center front will look like when sewn together. At the center it’s deciding where to have a little extra, imagine a straight line till the bottom of the curve of the pattern. I clip the pattern to the edge and leave just a hinge. The right part is then moved down to meet the scallop edge, creating a tiny dart. That dart is marked and sewn, resulting in wha...

Sewy Isabelle

Image
I apologize if the pictures are not lined properly in this post. I always used LiveWriter for my blog posts but that doesn't seem to work since I migrated to Windows 10 and I don't want to take the time to try to find out what is wrong. Furthermore I learned that Picasa (my favorite site for online photo-albums) will be discontinued later in the year and will be replaced by Google Photos. I've checked how that works and I'm not happy about that either. No linking to photos like I'm used to (or at least not obvious how to do it). Absolutely no idea what that will do to the photos on my blog (and that of a lot of  blogs). And I'm not going to re-link all the photos of the past nine years! Not my lucky tech-day as the Sewy-site seems to be down right now so I can't make a screenshot of the pattern or give a link to it. It's a very nice pattern. Here is my result and I'm ever so happy that it fits beautifully.

Inside / outside

Image
I love it when a garment is as neat on the inside as it is on the outside. Case in point: the bra I’m making. I’m trying a new pattern, the Sewy Isabelle that was so very kindly gifted to  me by a blog reader. Thank you again Gina! I can’t tell you nothing about the fit right now. As those of you who made bras know you can’t judge the fit of a bra untill it’s as good as finished. As it’s a weekend with a lot of rain here, so perfect sewing weather, I hope to finish it tomorrow.

A new bra

Image
It turned out to be very difficult to make good photos of this bra. These are the best shots I made The seam in the lace is hardly visible, don’t you agree? I like the result but it was a pita to use this lycra for the bra. In my previous set I used a lycra with less stretch for the bra and this lycra only for the accompanying panties. Should have done that here as well. This lycra is thin and very stretchy. Add to that I had not the usual stable fabric I use to interface the under/side cup and used “old fashioned” tulle and there’s a recipe for difficulties during construction. Wearable, but a few pleats that I’d rather not have when this is on my body. One panty to finish and then this set is ready.

An easy project

Image
Making a bra is an easy project for me. I’ve made lots in the past years. I don’t even remember properly when I started making them, but as the lady who took care of my children when they were little (when I was at work), introduced me to it, it’s quite safe to say it must be at least 15 years. And I still like making them. After intense projects or in a period of lacking mojo sewing lingerie is often my next step. Today I started on another set, all the parts for a bra and two accompanying panties are cut out. The bra is partially done. For this bra I wanted the lace, which is only a border lace, to follow the bottom of the band into the side. I made quite a lot of tutorials about sewing but they’re all quite old now, so might be time to update a bit and/or show you what I did. In the picture below you see the pattern piece for the part that’s beside the cup. It will be joined with the the band for the back (the lycra you see in the picture above). I folded the lace in an angle ...