Intrigued by a skirt

This February the Dutch magazine Knip Mode had a skirt in the pattern collection that I was immediately attracted to.

line drawing

There's only one version in the magazine, hemming is not very well done and as so often there is a difference in the line drawing and the actual pattern. In the line drawing the design lines of the front are straight, in the actual pattern these lines are curved, as can be seen in the photo. I prefer the straight lines.

frontback

I traced the pattern in the size based on my hip measurements. When I checked the circumference I was a little shocked to see so much "negative ease" there was. The skirt is intended to be made from a fabric with stretch, but it would be a lot of stretch for me and my hips are wide enough without stretching fabric over them.
So: back to the drawing board, literally (almost, it was the floor, looking forward to a bit more space).

My creative space, a mess! Original pattern pieces, my skirt block with lines drawn into it. The worst part is not captured in the photo ;).


I plan to make this skirt from a fabric with almost no stretch. The instructions in Knip Mode indicate no zipper because of the fabric with stretch they used.  Even if I would have used that kind of fabric it would not do for me, the difference between hip and waist measurement is too big. So I will add a center back seam and incorporate a zipper. 
I use my skirt block in combination with the original pattern to get a pattern based on my measurements. Not very straightforward, there are still a few decisions to be made in the distribution of the darts but that's for tomorrow. 
I'm not sure whether I'll succeed and whether the style will suit me,  I'm in an experimenting mood. 

pattern





Comments

Post a Comment

Popular posts from this blog

About t-shirts and hemming with coverstitch

Image
Pictures of the finished skirt have to wait. I want to hem my skirt with “steam a seam” tape but forgot to buy it and as most of my fabrics and notions are in storage, I had none available at all. So I spent my weekend sewing two t-shirts. The pattern is the Ann T-top from StyleArc: I’ve made this pattern several times now and it’s a great basic. After the initial one last year (never blogged about as far as I remember) I removed the gathers in the front by folding up at waist level. Until recently I used an old Ottobre pattern from 2007 as my base for t-shirts, which is still a great pattern. But, as you can guess, it’s in storage (by accident though). The neckline and hems of both t-shirts were finished with a coverstitch. I’ve had a love/hate relationship with my Janome coverstitch for quite a long time, but have become used to it and now it’s taken out and used regularly. For a long time I did not use it properly either and on the inside you could see the edge of the hem st...
Read more

Book review - Patternmaking for jacket and coat design

Image
A few of you expressed an interest in a proper review for the book Patternmaking for jacket and coat design by Pamela Vanderlinde. I found this book online when I was browsing through online bookstores looking for another book. As I’ve done quite a bit of pattern drafting in the past 2-3 years and have bought quite a few reference books on drafting as well, this caught my eye. Seeing some pages of it online I got really interested. It seemed to work from the same kind of block/sloper that I made for myself in Suzy Furrer’s Craftsy class so would help me get further from that starting point. I was not disappointed: it does work from a block or sloper, but the draft of a basic block or sloper is not included in the book . The author assumes you have a sloper to start with (explicitly mentioned in the book) and also assumes you know the basic terminology. I don’t have any problems understanding what is meant. Drafts for 1 piece or 2 piece sleeves are included and drafted different from ...
Read more

Burda dress 119, changes to pattern and construction

Image
There were a few changes I made to the pattern prior to and during construction. For those of you interested in the details, this is what I did. As indicated in the first post on this dress last week, I lengthened the upper body by 1.5 inch. This isn’t hard to do: fold the pleat on the right pattern piece, match it with the placement line on the left pattern piece and you have a full front in which it’s easy to draw a line to lengthen (or shorten) it. I did this just below the armhole. After that the seamlines, diagonal fold and placement lineslines are trued again. Of course this change of length is to be done on the back pattern piece too. This is not an error in the pattern piece. I know my upper body is longer than average and it’s a change I always do in Burda patterns. The other change was cutting off the extra triangle pieces that are on the right side pattern pieces for the top, skirt and waist part. Initially I cut them and understood what the intention was, an extra pleat abo...
Read more