bodner062

“Who saves something, has something” is a Dutch saying. The English equivalent is “waste not, want not”. I found an old Burda magazine yesterday evening when rummaging through a pile of magazines, searching for something else. I should be de-cluttering but this magazine is a keeper! I never made something from it, the pattern sheets were still attached. Probably because in 1993 I was pregnant with my first child and for a long time after that I did not really sew for myself. Some things look so current (or classic?) that I would like to make them. I’m still undecided as to what my next project will be, so perhaps???    

It turned out to be very difficult to make good photos of this bra. These are the best shots I made The seam in the lace is hardly visible, don’t you agree? I like the result but it was a pita to use this lycra for the bra. In my previous set I used a lycra with less stretch for the bra and this lycra only for the accompanying panties. Should have done that here as well. This lycra is thin and very stretchy. Add to that I had not the usual stable fabric I use to interface the under/side cup and used “old fashioned” tulle and there’s a recipe for difficulties during construction. Wearable, but a few pleats that I’d rather not have when this is on my body. One panty to finish and then this set is ready.

Making a bra is an easy project for me. I’ve made lots in the past years. I don’t even remember properly when I started making them, but as the lady who took care of my children when they were little (when I was at work), introduced me to it, it’s quite safe to say it must be at least 15 years. And I still like making them. After intense projects or in a period of lacking mojo sewing lingerie is often my next step. Today I started on another set, all the parts for a bra and two accompanying panties are cut out. The bra is partially done. For this bra I wanted the lace, which is only a border lace, to follow the bottom of the band into the side. I made quite a lot of tutorials about sewing but they’re all quite old now, so might be time to update a bit and/or show you what I did. In the picture below you see the pattern piece for the part that’s beside the cup. It will be joined with the the band for the back (the lycra you see in the picture above). I folded the lace in an angle ...

Could also be titlted: variations on one pencil skirt draft. This is a skirt I made in past week. Also inspired by a rtw skirt, I’ve seen various variations on this theme in the past year.Initially the pint on my right side was deeper, but I didn’t like the look of it. The fabric on the sides of the zipper is interfaced, it must be my body that makes it curve.   I nice project after such an intense one that my blouse was. I used a riri zipper that I bought 5 years ago in New York at a meetup with both Robin and Nancy . I thought it better to use it then to keep it in my stash forever as a too special zipper to use. The base for this skirt is my skirt block/sloper. The next skirts were all made based on the same block, really one pattern, many looks don’t you think? The one with the ruffles is the knock off Marni skirt from last year . I can’t remember a blog post specifically on the other two, but they were based on a Knip Mode pattern that I adapted using my block.

Let me first post a reminder of the original top that I was so inspired by. Followed by my version (looking a bit tired and no make-up after a run earlier). I’ll let the pictures do most of the talking.   As mentioned earlier I used a water soluble layer under the strips. This is just before I cut most of it away. A little anxious moment as I was unsure how the strips would behave without the stabilizer to hold them together. As you can see in the pictures of the blouse on me, they hold well. A word of caution if you use the water soluble fabric: don’t use steam with your iron. I forgot at some point and immediately the layer started to dissolve (I press a lot during sewing and it irritates me to see the (altered) back dart not pressed well). How it will be after laundry is another matter.Ironing will probably be a difficult task. Thank you all for the for the nice comments. Carmen, it really is a pity sometimes we all don’t live closer to each other, it would be so nice ...

Just want to share my progress, I’m so happy with the result of the front. Apart from the strips the placket was a challenge. I did not want the hidden placket till the neckline and figured out how to make a partial one. Might be worth a tutorial at some point.  Enough time spent in the sewing room this morning, I’m really longing to finish it but with a gathering of friends later today at our house I now have to close the door to it and prepare some food, take a shower and change. The saga of this blouse will be continued soon.

It’s getting serious. I’m working in the fashion fabric. I pinned out a little in the back, resulting in both a better fit in the back and the sleeve fitted better at the same time. I will post a picture of that last muslin phase when I have one ;). This morning I made the final pattern based on the original pieces and the muslin. Like Holly said in her comment on my last post: it’s not a project to whip up in an afternoon. The strips for the front took me about 2 hours and I took a huge shortcut. Though it’s only a shortcut from what I originally planned, there are no instructions. I planned to make strips in the conventional way: sew on the wrong side and turn the strip. When thinking about that I already saw a problem in pressing the seam open as I did not want the sewn side on the edge. After cutting the strips I encountered another “problem”. I wanted all sides of the strips to have the black on the edge (ocd, I know). Difficult to get right. Change of plans then: all the strip...

Good progress in my opinion. I’ve closed the center back pleat and have sewn the darts as well. Still a little bit too much space as the result of making the body sloper wider. This style of back suits me better than the wide one of the inspiration piece. The main attractive feature is the front(as Vicki commented too’). I’ll make a back that I like better. For the sleeves I reverted back to Suzy Furrer’s class. The result is so much better now. A little pleat in the back and I will see what happens there when I pin a bit of space out of the back. For those doing Suzy’s classes: it makes a difference how you draft your curves around the square size, the N-T and N-M lines. I had to flatten the upper curve but of course that depends on the pattern you’re making and your figure. Just something to consider when you’’re working on it. A few tweaks and then I hope to be ready to finalize the pattern.  It’s a fun project. Thank you for the comments letting me know that you like these pos...

Sorry to show you again such boring fabric. Sometimes I think I’m only publishing posts with muslins ;). They serve a purpose though and I like to document what I do in my blog too. Muslins can be the first part of a real garment but also be part of my progress in drafting patterns and (of course) a muslin can help decide it’s no use to continue on a project because the style does not work for me. Not so for this blouse, I like this so far. My interpretation of the front waist pleats is sewing the dart partially. I’m not sure yet how to proceed with the back. The original has a waist seam in the back that continues to halfway the front. My guess is that the wide back is gathered to the waist. I’m not so sure I would like it that way on me and consider leaving out the pleat center back and use partially stitched darts as in the front. Any thoughts on this? Analyzing the fit and design I need more curve the front placket . I like the opening at the neckline of the original and dra...

When inspired like this I want to continue and despite the heat I started working on the muslin. The main focus point of this design are of course the woven strips at the top, I think it’s difficult to do this right without using a layer to fix them during construction. For the final product I plan to use water soluble fabric (Avalon) for this. In the muslin I opted for a thin fabric that does not add bulk and which I will cut away later. It’s thin and fluid so I starched it. I traced the pattern piece on this “temporary”  pattern piece with carbon tracing paper on both sides. In that way I can see the actual seam lines adding the strips of fabric and in construction. For the weaving I used fabric strips of different width as in the inspiration piece.   When woven and pinned I turned the pattern piece on the carbon tracing paper again and marked it. Then I cut away the extra length of the strips. There is a little room between the strips but not a lot. On to the next p...